Contents and categories

Display all

Contents and categories

Series

Display all results

AURO® SPOT 400

LED Moving Head
Item No.: CLAS400
RDM-capable moving head with high-power single LED
200,000 lx @ 1 m, 4470 lm
High-speed 3-phase motors
Motor focus, pan and tilt with 16-bit resolution
Automatic positioning correction
2 color wheels, 12 colors, split colors, warm and cold white plus open
2 gobo wheels, 7 rotating, 9 fixed gobos plus open
Frost filter
Rotating 3, 5 and 8-facet prisms
0 – 20 Hz strobe
Smooth 100 – 0% dimming with 4 selectable curves
Temperature controlled low-noise fan
3 and 5-pin DMX and Neutrik powerCON inputs and outputs
Battery powered 6-button display for offline configuration
 

Contents and categories

Display all

Contents and categories

Series

Display all results
RDM-capable moving head with high-power single LED
200,000 lx @ 1 m, 4470 lm
High-speed 3-phase motors
Motor focus, pan and tilt with 16-bit resolution
Automatic positioning correction
2 color wheels, 12 colors, split colors, warm and cold white plus open
2 gobo wheels, 7 rotating, 9 fixed gobos plus open
Frost filter
Rotating 3, 5 and 8-facet prisms
0 – 20 Hz strobe
Smooth 100 – 0% dimming with 4 selectable curves
Temperature controlled low-noise fan
3 and 5-pin DMX and Neutrik powerCON inputs and outputs
Battery powered 6-button display for offline configuration
Description

Featuring 16-bit resolution and high speed 3-phase motors for 630° pan and 230° tilt,the Cameo AURO® SPOT 400 is a professional moving head with RDM capability and powerful, ultra bright single LED. The fixture sports 2 gobo wheels, rotating and fixed gobos, 2 color wheels and a choice of 3 rotating prisms enabling spectacular lighting and stunning effects with 12 intense colors, split colors and two temperatures of white.

The AURO® SPOT 400 provides 5-channel, 19-channel and 27-channel DMX control and auto programs , so that operation as master, slave and standalone is possible. Functions include motorized focus, frost filter, a choice of 4 smooth dimming curves, shake effects and a fast 0 - 20 Hz cycle strobe.

The heavy-duty compound enclosure integrates a battery-powered 6-button display that allows convenient offline configuration, 3-pin and 5-pin DMX inputs and outputs, Neutrik powerCON connectors and a temperature-controlled low-noise fan. The multi- voltage AURO® SPOT 400 runs on 100 - 240 V AC.

Specifications
DMX512
Environment-friendly
LED technology
Master & slave
Music control
Standalone mode
Strobe
RDM

DMX512

Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).

Environment-friendly

The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.

LED technology

LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.

Master & slave

Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.

Music control

In music control mode, the device is controlled via the built-in microphone and can follow the rhythm of the music, for example.

Standalone mode

In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.

Strobe

Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.

RDM

This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.

Product type LED Moving Lights
Type Moving Head
Colour spectrum cold white
Number of LEDs 1
Colour temperature 9300 K
LED type 180 W
Refresh rate 3600 Hz
Dispersion 12 °
Number of gobos 16
Gobo Size Exterior Diameter: 20.4 mm - Motif: 16.5 mm
DMX input XLR 3-pin male , XLR 5-pin male
DMX output XLR 3-pin female , XLR 5-pin female
DMX mode 19-channel , 27-channel , 5-channel
DMX Functions 3 x Prism , Auto programs , Colour wheel , Dimmer , Dimmer Curves , Focus , Frost , Gobo Rotation , Gobo Shake , Gobo wheel , Motion Macro , Pan/Tilt , Pan/Tilt fine , Stroboscope
PAN movement 540° / 630°
TILT movement 230°
Standalone modes Auto programs , Master/Slave Mode , Static Mode
Controls - , + , Battery Display , Down , Enter , Mode , Up
Indicators colour LC display
Operating voltage 100 V AC - 240 V AC, 50 - 60 Hz
Power consumption 290 W
Power connector Neutrik PowerCon
Housing material ABS , metal
Cabinet colour Black
Cooling temperature-controlled fan
Illuminance 200000lx @ 1m
Luminous flux 4470 lm
Width 405 mm
Height 565 mm
Depth 285 mm
Weight 16 kg
Features 1m power cable with Neutrik powerCON connector , 2 x omega mounting
Other items
Buy
No suitable online shop found? Then search on Google Shopping Or find a local dealer: