Contents and categories

Display all

Contents and categories

Series

Display all results
  • NEW

AURO® SPOT Z300

LED Spot Moving Head
Item No.: CLASZ300
Compact spot moving head with 7,500 lm luminous flux
10° to 25° zoom range
Extremely even light dispersion free of hotspots
Automatic position correction
Motorised focus
2 gobo wheels, 6 rotating gobos (indexable and exchangeable) and 6 fixed gobos + open
Continuously adjustable colour wheel with 8 intense colours + open
Indexable and rotating 5-facet linear and 6-facet circular prisms
4 programmable macros for standalone and master-slave operation
Soft frost filter for washlight effects
Flicker-free for use in TV, film and photo studios
Battery-powered 6-button display for offline configuration
 

Contents and categories

Display all

Contents and categories

Series

Display all results
Compact spot moving head with 7,500 lm luminous flux
10° to 25° zoom range
Extremely even light dispersion free of hotspots
Automatic position correction
Motorised focus
2 gobo wheels, 6 rotating gobos (indexable and exchangeable) and 6 fixed gobos + open
Continuously adjustable colour wheel with 8 intense colours + open
Indexable and rotating 5-facet linear and 6-facet circular prisms
4 programmable macros for standalone and master-slave operation
Soft frost filter for washlight effects
Flicker-free for use in TV, film and photo studios
Battery-powered 6-button display for offline configuration
Description

With fantastic gobo projections, morphing and mid-air effects, the Cameo AURO® SPOT Z 300 is made for impressive lighting design. Compact yet fully featured, the RDM-enabled spot moving head offers both a 540° and 630° pan and a 270° tilt with 16-bit resolution and automated position correction. The 10° to 25° zoom range facilitates both short- and long-range projections, which remain pin sharp at all times thanks to the motorised focus.

The AURO® SPOT Z 300 is fitted with an extremely bright 200-watt cold-white LED. It is flicker-free and distinguishes itself with incredibly even light dispersion without any hotspots. A continuously adjustable colour wheel with eight brilliant colours, two prisms, two gobo wheels, six indexable and rotating exchangeable gobos and six fixed gobos means that the moving head is ideally equipped for exciting, professional performances.

The AURO® SPOT Z 300 can be controlled via DMX or be automated. Featuring freely programmable macros, it can be used as a standalone or operated in master/slave mode. DMMX functions include rapid strobe, gobo shake and smooth dimming. Cooling and silent operation are provided by a temperature-controlled fan in robust housing made with ABS and metal. 3- and 5-pin DMX connections and powerCON-compatible power sockets permit convenient daisy chaining, while the battery-powered 6-button display allows power-independent configuration. The AURO® SPOT Z 300 comes with a power cable and two Omega brackets.

Specifications
Cold white
DMX512
Environment-friendly
LED technology
Master & slave
Standalone mode
Circular prism
Colour wheel
Focus
(Gobo wheel)
Linear prism

Cold white

According to the colour temperature scale in Kelvin (K), “cold white” is a very bright, clear light in the colour temperature range between 5,000 and 10,000 K; it is slightly artificial in character and goes well with rich primary colours.

DMX512

Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).

Environment-friendly

The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.

LED technology

LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.

Master & slave

Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.

Standalone mode

In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.

Circular prism

A circular prism multiplies the beam or the gobo projection, placing the result inside a circle.

Colour wheel

Turning the colour wheel, which is fitted with various filters, enables very fast changes of colour.

Focus

The focus function serves to focus the light beam and the gobo projection at any distance.

(Gobo wheel)

Gobo wheels are fitted with static or rotating gobos made of metal or glass. Gobos are essentially templates that allow the projection of patterns, shapes and graphics.

Linear prism

A linear prism multiplies the beam or the gobo projection, placing the result inside a row.

Product type LED Moving Lights
Type Moving Head
Colour spectrum cold white
Number of LEDs 1
LED type 200 W
Refresh rate 1200 Hz , 12000 Hz , 2000 Hz , 25000 Hz , 3600 Hz , 800 Hz
Dispersion 10 - 25 °
Number of colours Infinitely rotatable colour wheel with 8 colours + white
DMX input XLR 3-pin male , XLR 5-pin male
DMX output XLR 3-pin female , XLR 5-pin female
DMX mode 17-channel , 20-channel
DMX Functions 2 x Prism , Auto programs , Colour wheel , Device Settings , Dimmer , Focus , Frost , Gobo Rotation , Gobo Shake , Gobo wheel , Motion Macro , Pan/Tilt , Pan/Tilt fine , Rotation Gobo Wheel , strobe
PAN movement 540° / 630°
TILT movement 270°
Standalone modes Auto programs , Master / Slave mode , User macros
Control DMX512 , RDM enabled
Controls 4 x Arrow keys , Enter , Mode
Indicators Backlit colour LCD display , Battery supply for mains-independent system settings (automatically rechargeable battery)
Operating voltage 100 V AC - 240 V AC, 50 - 60 Hz
Power consumption 320 W
Fuse T4AL250V (5 x 20 mm)
Operating Temperature 0 - 40 °C
Relative Humidity < 85 %, not condensing
Power connector Neutrik powerCON IN / OUT
Housing material ABS plastic , metal
Cabinet colour Black
Illuminance 162000 lx @ 1 m
Luminous flux 7500 lm
Width 282 mm
Height 469 mm
Depth 186 mm
Weight 11,2 kg
Accessories (included) 1 m power cable with Neutrik powerCON connector included , 2 x omega mounting
Other items
Buy
No suitable online shop found? Then search on Google Shopping Or find a local dealer: