TS 200 WW Theatre Spotlight with Fresnel Lens and 180 Watt Warm White LED in Black Housing
Der Cameo TS 200 WW ist ein vielseitiger Theater-Spot mit Fresnel-Linse und manuellem Zoom, das erlaubt, den Abstrahlwinkel seines gleichmäßigen, weich umrandeten Lichtstrahls stufenlos von 14° auf weite 38° zu verstellen. Die 180 Watt starke warmweiße LED des RDM-fähigen Scheinwerfers mit 3.100 Kelvin Farbtemperatur erzielt eine hohe Lichtstärke von 67,500 Lux bei 1 m Entfernung. Mit einem extrem hohen Farbwiedergabeindex von 96 zeigt der Scheinwerfer Farben natürlich und unverfälscht. .
Zu den DMX-Funktionen des Spots gehören ein schnelles Strobe, das sich von 1 - 20 Hz einstellen lässt, und verschiedene Dimmerkurven mit 16-Bit Auflösung. Wählbare Wiederholraten bis 25 kHz sichern einen flackerfreien Betrieb. Der TS 200 WW besitzt ein robustes Metallgehäuse mit temperaturgesteuertem Lüfter, ein Display mit 4 Knöpfen dient zur bequemen Konfiguration. 3- und 5-polige DMX-Anschlüsse und Power-Twist-Netzbuchsen ermöglichen ein problemloses Hintereinanderschalten. Zum Lieferumfang gehören eine drehbare Torblende zum Begrenzen des Lichtkegels und ein Farbfilterrahmen.
COB LED technology
The current “chip-on-board” multi-LEDs allow dense, large-area light sources to be created that are characterised by their high luminosity and wide range of even colours. Cold white According to the colour temperature scale in Kelvin (K), “cold white” is a very bright, clear light in the colour temperature range between 5,000 and 10,000 K; it is slightly artificial in character and goes well with rich primary colours.
DMX512
Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).
Environment-friendly
The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.
Master & slave
Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
Standalone mode
In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.
Warm white
According to the colour temperature scale in Kelvin (K), warm white is a soft, lightly yellowish light with a natural character that is pleasant to the human eye.
RDM
This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.
The high-frequency control of the LEDs while dimming ensures flicker-free operation, including for filming purposes.
LED technology
LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
Strobe
Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.
- Product type: Other Lighting Accessories
- Type: Transport Bags
- Color: grey