F2 FC IP
Based on the already established F2 models of the F series, there are now three more weatherproof Fresnel spotlights that open up completely new areas of application with their IP65 protection class. Thanks to the IP65 upgrade, these Fresnel spotlights can now also be used for open-air theatres, musicals or concerts as well as film and TV productions and defy all weather conditions.
With a 200 mm quality lens and a luminous flux of 6,500 lm, the RDM-capable spotlight produces a softly edged light beam with an infinitely adjustable beam angle of 18° to 55°, offering a perfect and energy-saving alternative for conventional 1 kW Fresnel models. Its 250 W RGBW LED with continuously adjustable colour temperature from 1,600 to 6,500 K has a service life of 50,000 hours. Colours are reproduced naturally and unaltered thanks to the extremely high colour rendering index of more than 90.
The F2 FC IP has 6 DMX control modes, a fast strobe function and 4 dimmer curves with 16-bit resolution and adjustable response. Six selectable pulse width modulation frequencies up to 25 kHz ensure flicker-free operation, highly efficient heat pipe cooling and a temperature-controlled fan ensure optimal function. The robust cast aluminium housing is equipped with a rotary encoder and OLED display for convenient configuration of the spotlight, 5-pin DMX connections and Power-Twist mains sockets enable easy back-to-back switching. The scope of delivery includes an 8-way barndoor, a gel frame and the power cable.
DMX512
Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).
Environment-friendly
The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.
Protection class IP65
The IP code of the protection class indicates how well the sensitive parts of the device are protected from foreign bodies and water entering. This device is fully protected from the penetration of dust and water jets.
LED technology
LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
Master & slave
Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
RGB additive colour system plus white LEDs
Additional white LEDs create more contrast and clearer colour boundaries. What is more, they improve the creation of white and pastel colours.
Standalone mode
In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.
Strobe
Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.
RDM
This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.
Various dispersion angles possible
This product is ETL certified.
The high-frequency control of the LEDs while dimming ensures flicker-free operation, including for filming purposes.
| Product type | LED Fresnel Spotlight |
| Type | Outdoor |
| Colour spectrum | RGBW |
| Number of LEDs | R: 18 PCS / G: 18 PCS / B: 16 PCS / W: 37 PCS |
| LED type | 240 W (ca. 50,000 Operating Hours) |
| Refresh rate | 800 - 25000 Hz |
| Dispersion | Beam Angle: 17 ° - 53 °, Field Angle: 30 ° - 87 ° |
| Lens | 200 mm Fresnel |
| DMX input | 5-Pol |
| DMX output | 5-Pol |
| DMX mode | 10-channel CCT, 10-channel HSI, 14-channel, 3-channel CCT, 3-channel HSI, 4-channel, 7-channel CCT, 7-channel HSI, 8-channel, 9-channel |
| DMX Functions | Colour macros, Device Settings, Dimmer, Dimmer Curve, Dimmer Fine, Hue Saturation, RGBW, RGBW Fine, strobe |
| Standalone modes | Loop, Master / Slave mode, Static |
| Controls | Encoder |
| Indicators | OLED Display |
| Operating voltage | 100 V AC - 240 V AC, 50 - 60 Hz |
| Power consumption | 250 W |
| power factor | 0.95 / 230 V, 0.99 / 120 V |
| Power connector | TRUE1 Compatible Power I/O Socket |
| Housing material | Die-cast aluminium |
| Cabinet colour | Black |
| Protection class IP | IP65 |
| Cooling | Combination of Heat Pipe and Temperature Controlled Fan |
| Luminous flux | 6500 lm |
| Efficiency | 27 lm/W |
| Color temperature | 1600 - 6500 K |
| Ambient temperature (in operation) | -15 - 45 °C |
| Weight | 10 kg |
| Width | 270 mm |
| Height | 292 mm |
| Depth | 322 mm |
- Product type: Other Lighting Accessories
- Type: Transport Bags
- Color: grey
For a quote on this item, please contact our sales department or make an appointment with our sales representatives.
Adam Hall North America Inc.
sales.us@adamhall.com
+1 973-335-7888