Contents and categories

Display all

Contents and categories

Series

Search suggestions

Display all results

DURA® SPOT 200 IP67 Install Spot with RGBW LED

Item No.: CLDS200
Series: DURA® Series
Versions:
Efficient 20 W RGBW LED
IP67 and IK08 classification for permanent outdoor use
4 sizes to fit any application
6° beam angle
Various filters for different beam angles available as accessories
Filters can be applied without breaking IP Seal
Anti glare shield included for less light spill
Calibrated LEDs for excellent colour consistency
Control via DMX, RDM or external control remote (UNICON)
Minimum LED lifetime: 50,000 hours (to >70% luminous output)
 

Contents and categories

Display all

Contents and categories

Series

Search suggestions

Display all results
Efficient 20 W RGBW LED
IP67 and IK08 classification for permanent outdoor use
4 sizes to fit any application
6° beam angle
Various filters for different beam angles available as accessories
Filters can be applied without breaking IP Seal
Anti glare shield included for less light spill
Calibrated LEDs for excellent colour consistency
Control via DMX, RDM or external control remote (UNICON)
Minimum LED lifetime: 50,000 hours (to >70% luminous output)
Description

Imagine transforming an ordinary building into a breathtaking work of art with just a few strategically placed lights. With the DURA® Spot fixtures, this vision can become a reality. These IP67-rated outdoor install fixtures are built to withstand any weather conditions, making them perfect for illuminating objects, buildings, and facades of historical or artistic architecture.

With 4 different sizes available, the DURA® Spots are offering flexibility to its users - The DURA® Spot 60, 100, 200 and 400 are all equipped with an efficient 20W RGBW LED and calibrated for excellent colour consistency. The 6° beam angle and anti-glare shield included with each lamp help to minimize light spill and create a focused, stunning effect.

Various filters for different beam angles are available as accessories, providing versatility in lighting design and allowing you to customize the lighting to fit any application. And with control via DMX, RDM, or external control remote via Cameo's UNICON® (CLIREMOTE), you can easily adjust the lighting to suit any mood or occasion.

Boasting a minimum LED lifetime of 50,000 hours (to >70% luminous output), the DURA® Spots are built to last. Whether you're a lighting designer or planner looking to create a unique artistic touch for a building, or a business owner looking to enhance the appearance of your property, the DURA® series is the perfect solution. So why settle for ordinary lighting when you can create something extraordinary with the DURA® Spot series?

Specifications
DMX512
Environment-friendly
LED technology
Master & slave
RGB additive colour system plus white LEDs
Standalone mode
Strobe
RDM
IP67

DMX512

Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).

Environment-friendly

The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.

LED technology

LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.

Master & slave

Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.

RGB additive colour system plus white LEDs

Additional white LEDs create more contrast and clearer colour boundaries. What is more, they improve the creation of white and pastel colours.

Standalone mode

In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.

Strobe

Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.

RDM

This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.

The high-frequency control of the LEDs while dimming ensures flicker-free operation, including for filming purposes.

IP67

The IP code of the protection class indicates how well the sensitive parts of a device are protected against the ingress of foreign bodies and water. This unit is fully protected against the ingress of dust and temporary immersion.

General
Product type
LED Lighting
Type
Installation spotlights
Colour spectrum
RGBW
Number of LEDs
12
LED type
4in1 chip
LED power
20 W
Luminous flux
7000 lm
LED PWM Frequency
650 Hz, 1530 Hz, 3600 Hz, 12000 Hz, 18900 Hz, 25000 Hz
Half spread angle
6 °
Tenth dispersion angle
11 °
DMX In/Out
Permanently mounted 5-pin signal cable (DMX In and Out), 2 m, open ends
DMX Functions
Calibration, CCT, Colour presets, Device Settings, Dimmer 8bit/16bit, Dimmer Curve, Dimmer Response, Factory reset, PWM, Record User Colour, RGBW, Strobe
Control
DMX512, RDM
Standalone Functions
Auto programs, CCT, Colour presets, Direct, Timer
Controls
External Control Remote (UNICON)
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power consumption
220 W
Inrush Current Power
40A / 1ms (first half-wave)
Colour rendering index (Ra)
>79 @ 8700K
Efficiency
32 lm/W
power factor
>0,9 / 100-240V
Power connector
Permanently mounted mains cable H07RN-F, 3x 1.5 mm², 2 m, open ends
Overvoltage protection
4 KV
Ambient temperature (operating)
-20 - 45 °C
Relative Humidity
< 80%, not condensing
Housing material
Die-cast aluminium
Cabinet colour
Black
Corrosion resistance
C5-M powder coating
Protection class
IP67
Cable ducts
IP68
Impact resistance level
IK08
Housing Cooling
forced air cooling
Max. Mounting height
unlimited
Height
250 mm
Width
282 mm
Depth
284 mm
Weight
13,09 kg
Accessories (included)
Half anti glare shield, Mounting ring for optional interchangeable lenses
Accessories (optional)
External Control Remote (UNICON), Full anti glare shield, Interchangeable lenses (20°, 40°, 55°, 60°x10°)
Downloads & links
Name
Category
Type
File size
User´s Manual (07-2023) Manual pdf 8 MB
DMX Control Table (07-2023) Data Sheet pdf 55 KB
Technical Drawing Data Sheet dxf 14 MB
Technical drawing (10-2023) Data Sheet pdf 295 KB
Data sheet (11-2023) Data Sheet pdf 639 KB
Fixture Library (10-2023) Software zip 11 KB
Light distribution curves (12-2023) Software zip 23 KB
Tender documents Tender Specifications zip 131 KB
Cameo Product Catalogue 2024 Catalog pdf 12 MB
Product images Image files zip -
User´s Manual (07-2023)

Category: Manual

Type: pdf

File size: 8 MB

DMX Control Table (07-2023)

Category: Data Sheet

Type: pdf

File size: 55 KB

Technical Drawing

Category: Data Sheet

Type: dxf

File size: 14 MB

Technical drawing (10-2023)

Category: Data Sheet

Type: pdf

File size: 295 KB

Data sheet (11-2023)

Category: Data Sheet

Type: pdf

File size: 639 KB

Fixture Library (10-2023)

Category: Software

Type: zip

File size: 11 KB

Light distribution curves (12-2023)

Category: Software

Type: zip

File size: 23 KB

Tender documents

Category: Tender Specifications

Type: zip

File size: 131 KB

Cameo Product Catalogue 2024

Category: Catalog

Type: pdf

File size: 12 MB

Product images

Category: Image files

Type: zip

File size: -

Related Products
Buy

For a quote on this item, please contact our sales department or make an appointment with our sales representatives.

Adam Hall North America Inc.
sales.us@adamhall.com
+1 973-335-7888