Q-SPOT 40I W
Highlighting objects with pinpoint accuracy and showcasing them in brilliant colours both indoors and outdoors - that is the forte of Cameo's Q-Spot 40i. The compact, IP65-certified spotlight can be used in horticulture and public parks as well as in galleries or museums. It is equipped with a powerful 40 watt RGBA LED that has a 50,000 hour life expectancy and comes with a 360° rotatable anti-glare shield.
The Q-Spot 40i is RDM enabled and sports a custom lens for a tightly focussed 4.5° beam spread. It comes with two replacement lenses offering versatility and a choice of 10° and 25° angles. Using 16-bit technology, the spotlight achieves intense, high definition RGBA colour mixes and ultra smooth dimming with selectable curves and response. It operates without flicker, and highly efficient convection cooling ensures noiseless operation and minimum maintenance requirements.
The Q-Spot 40i provides 4 modes of DMX control, autorun programs and master, slave and standalone capability. The spotlight features a bright OLED display with 4 touch buttons for easy configuration. The rugged all-metal housing provides 3-pin DMX and power inputs and outputs with waterproof threaded coupling for trouble-free daisy-chaining and power linking. The Q-Spot 40i is available with a black (item no. CLQS40IB) or white housing (item no. CLQS40IW).
DMX512
Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).
Environment-friendly
The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.
Protection class IP65
The IP code of the protection class indicates how well the sensitive parts of the device are protected from foreign bodies and water entering. This device is fully protected from the penetration of dust and water jets.
Infrared remote control
The device is fitted with an infrared sensor and can be controlled wirelessly using the IR remote control unit included.
LED technology
LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
Master & slave
Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
RGB additive colour system plus amber LEDs
Amber is a colour that is outside the RGB spectrum. Additional amber LEDs allow warmer and richer colours to be created.
Standalone mode
In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.
RDM
This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.
Various dispersion angles possible
The high-frequency control of the LEDs while dimming ensures flicker-free operation, including for filming purposes.
| Product type | LED PAR Lighting |
| Type | Outdoor |
| Colour spectrum | RGBA |
| Number of LEDs | 1 |
| LED type | 40 W |
| Average LED lifetime | 50000 hrs. |
| Refresh rate | 3600 Hz |
| Dispersion | 4.5° (10°, 25° over optional diffusors) ° |
| DMX input | 3-pole IP65 plug, screwable |
| DMX output | 3-pole IP65 plug, screwable |
| Protocols | USITT DMX-512 |
| DMX mode | 2-channel, 3-channel 1, 4-channel, 9-channel |
| DMX Functions | colour jump, colour macro, master dimmer, RGBW, strobe |
| Wireless DMX | no |
| Standalone modes | Auto run, colour fade, colour jump, Dimmer Mode, slave mode |
| Controls | Enter, Mode, Value Down, Value Up |
| Indicators | OLED Display |
| Operating voltage | 100 V AC - 240 V AC, 50 - 60 Hz |
| How many devices can be connected (110 V) | 5 |
| How many devices can be connected (240 V) | 5 |
| Power consumption | 48 W |
| Power connector | 3-pin special connector, screwable |
| Max. output current | 12 A |
| Power supply connection | 3-pole IP65 plug, screwable |
| Housing material | Metal |
| Cabinet colour | Black |
| Protection class IP | IP65 |
| Cooling | Convection |
| Illuminance | 36900 lx @ 1 m |
| Luminous flux | 582 lm |
| Maximum Ambient Temperature | 0 - 40 °C |
| Width | 107 mm |
| Height | 150 mm |
| Depth | 160 mm |
| Weight | 1,9 kg |
| Accessories (included) | DMX IN Cable, End caps for Power Out & DMX Out, Power IN Cable |
- Product type: LED PAR Lighting Accessories
- Type: Remote Controls
- Width: 52 mm
- Product type: LED PAR Lighting Accessories
- Type: DMX Adapter
- Connector 1: DMX IP65 female
- Product type: LED PAR Lighting Accessories
- Type: DMX Adapter
- Connector 1: DMX IP65 male
- Product type: LED PAR Lighting Accessories
- Type: DMX Adapter
- Connector 1: DMX IP65 female
- Product type: LED PAR Lighting Accessories
- Type: DMX Adapter
- Connector 1: DMX IP65 male
- Product type: LED PAR Lighting Accessories
- Type: Extension Cable
- Protection class IP: 65
- Product type: LED PAR Lighting Accessories
- Type: Extension Cable
- Cable Length: 5 m
- Product type: Pre-assembled Cables
- Type: Extension Cable
- Protection class IP: 65
- Product type: LED PAR Lighting Accessories
- Type: Extension Cable
- Protection class IP: 65
For a quote on this item, please contact our sales department or make an appointment with our sales representatives.
Adam Hall North America Inc.
sales.us@adamhall.com
+1 973-335-7888