G4 TW Tracklight with Tunable White LED

Item No.: CLG4TWWH

Series: G-Series

Versions:

Tracklight with 40 W Tunable-White COB-LED

Colour temperature: 2,700 K - 6,500 K

560 lm Luminous flux

Use on commercially available busbar systems

Applications: Museum, retail, gastronomy and many more.

Beam angle flexibly adjustable via magnetic filters

Optional magnetic filters (CTO, CTB, Honeycomb)

FC & TW models compatible with DMX, W-DMX & RDM

Selectable pulse width modulation (up to 25 kHz) for flicker-free operation

Passive cooling for virtually silent operation

Buy

Search now

Contents and categories

Display all

Contents and categories

Series

Search suggestions

Display all results

Tracklight with 40 W Tunable-White COB-LED

Colour temperature: 2,700 K - 6,500 K

560 lm Luminous flux

Use on commercially available busbar systems

Applications: Museum, retail, gastronomy and many more.

Beam angle flexibly adjustable via magnetic filters

Optional magnetic filters (CTO, CTB, Honeycomb)

FC & TW models compatible with DMX, W-DMX & RDM

Selectable pulse width modulation (up to 25 kHz) for flicker-free operation

Passive cooling for virtually silent operation

Description

Ob im Museum, im Ladengeschäft oder in einem Restaurant - bei der Beleuchtung gewerblicher Flächen gelten nahezu identische Grundanforderungen: professionelle Lichtqualität für die natürliche Ausleuchtung von Räumen, Objekten und Menschen, hohe Flexibilität in der Anwendung sowie maximale Kosteneffizienz im dauerhaften Einsatz. Mit den Tracklights der G-Serie bietet Cameo Licht- und Raumplanern, Designern und Installationsdienstleistern vielseitige Tracklights für den Einsatz in handelsüblichen Stromschienensystemen. Die dezenten und vielseitigen LED-Leuchten unterscheiden sich in vier unterschiedlichen Varianten: Neutralweiß, Tungsten, Tunable White & Full-Colour.

Das G4 TW Tracklight ist mit einer 40 Watt starken Tunable White COB-LED ausgestattet, die einen Lichtstrom von 560 Lumen erzeugt. Die Farbtemperatur des G4 TW lässt sich variabel im Bereich von 2.700 K bis 6.500 K einstellen. Über magnetische Filter lässt sich der 5°-Abstrahlwinkel ohne Werkzeugeinsatz flexibel anpassen. Optional stehen zahlreiche Wechsellinsen für engere und weitere Abstrahlwinkel sowie CTO-, CTB- und Honeycomb-Filter zur Verfügung. Zudem ermöglicht das G4 TW die variable Anpassung der PWM- Frequenz bis 25 kHz für den flimmerfreien Betrieb.

Die Tracklights der Cameo G-Serie wurden für den Einsatz an handelsüblichen Stromschienensystemen entwickelt und ermöglichen die Übertragung von Strom über den Schienenadapter je nach verwendetem Hersteller-System. Auf diese Weise lassen sich die Leuchten flexibel an wechselnde Raumdesigns anpassen - von zeitlich begrenzten Ausstellungen in einem Museumssaal über wechselnde Store-Konzepte im Retail-Sektor bis zu variablen Tischkonfigurationen in der Gastronomie.

Die FC- & TW-Modelle der Cameo G-Serie verfügen darüber hinaus über integrierte Protokolle wie DMX512, W-DMX für die kabellose Ansteuerung sowie RDM für die komfortable Konfiguration und Überwachung der Tracklights. Dank der passiven Konvektionskühlung arbeitet das G4 TW dabei nahezu lautlos und eignet sich auch für besonders geräuschsensible Umgebungen.

Alle Tracklights der Cameo G-Serie sind in schwarzer und weißer Gehäusefarbe erhältlich.

Specifications

COB LED technology

The current “chip-on-board” multi-LEDs allow dense, large-area light sources to be created that are characterised by their high luminosity and wide range of even colours. Cold white According to the colour temperature scale in Kelvin (K), “cold white” is a very bright, clear light in the colour temperature range between 5,000 and 10,000 K; it is slightly artificial in character and goes well with rich primary colours.

DMX512

Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).

Environment-friendly

The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.

LED technology

LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.

Master & slave

Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.

Standalone mode

In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.

Strobe

Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.

RDM

This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.

The W-DMX™ feature facilitates the wireless transmission of DMX control data.

Various dispersion angles possible

The device features wireless master/slave operation.

This product is ETL certified.

The high-frequency control of the LEDs while dimming ensures flicker-free operation, including for filming purposes.

General

Product type

LED Lighting

Type

Installation spotlights

Colour spectrum

Tunable White

Color temperature

2700 - 6500 K

Number of LEDs

Average LED lifetime

30000 hours

LED type

2in1 chip

LED PWM Frequency

800 Hz, 1200 Hz, 2000 Hz, 3600 Hz, 12 kHz, 25 kHz - adjustable

Dispersion

5 °

DMX input

RJ45

DMX output

RJ45

DMX Functions

Cool White, Dimmer, Dimmer Fine, Colour temperature, Device Settings, Strobe, Warm White

Control

DMX512, RDM, W-DMX

Standalone Functions

Static

Controls

External Remote Control, W-DMX Button

RDP (Material Group A)

0.20 @ 2700 K, 0.50 @ 6500 K

RDP (Material Group B)

0.61 @ 2700 K, 0.65 @ 6500 K

Operating voltage

100 V AC - 240 V AC, 50 - 60 Hz

Power consumption

40 W

Luminous flux

560 lm

Colour rendering index (Ra)

>97

Power connector

Rail adapter (selectable phase)

Compatible rails

Global Track

Ambient temperature (operating)

0 - 40 °C

Relative Humidity

< 80 %, not condensing

Cabinet colour

white

Housing material

Metal

Housing Cooling

Convection

Width

80 mm

Length

195 mm

Weight

1,3 kg

Optional accessories

CTB filter, CTO filter, Honey comb grid, Interchangeable lenses