OTOS® B5 IP65 Beam Moving Head

Item No.: CLOTOSB5

Series: OTOS® Series

Versions:

IP65 rated beam moving head with 480 W discharge lamp

11,500 lux @100 m, 511,000 lux @15 m

High quality optics with 205 mm front lens

Continuous CMY colour mixing + 14 dichroic filters for saturated colours and whites

Particularly narrow beam angle of 1°

Static gobo wheel with 19 gobos + open

3 rotatable and indexable prisms on two levels (overlapping)

Easy handling and low weight (33 kg)

Flexible control options via integrated W-DMX™ transceiver, DMX and RDM

Buy

Search now

Contents and categories

Display all

Contents and categories

Series

Search suggestions

Display all results

IP65 rated beam moving head with 480 W discharge lamp

11,500 lux @100 m, 511,000 lux @15 m

High quality optics with 205 mm front lens

Continuous CMY colour mixing + 14 dichroic filters for saturated colours and whites

Particularly narrow beam angle of 1°

Static gobo wheel with 19 gobos + open

3 rotatable and indexable prisms on two levels (overlapping)

Easy handling and low weight (33 kg)

Flexible control options via integrated W-DMX™ transceiver, DMX and RDM

Description

Razor-sharp, dazzlingly bright beams still characterise the appearance of modern lighting designs. With the OTOS® B5, you can create these expressive looks on any indoor or outdoor stage. The IP65- compliant beam moving head is a light-intensive powerhouse based on a 480 watt discharge lamp and delivers an illuminance of 11,500 lux at 100m. Via the high-quality optical system with 205 mm front lens, the OTOS® B5 shoots out its beams with an impressively narrow 1° beam angle and sets precise, assertive accents on concert and festival stages, in the context of outdoor events or in large TV show productions.

The effects section of the OTOS® B5 includes a static gobo wheel with 19 gobos + open and three rotatable and indexable prisms on two planes that allow you to create a variety of mid-air effects and add depth to your designs. You can also create a wide range of colours thanks to the CMY colour mixing and the additional colour wheel with 14 dichroic filters for particularly saturated colours.

Apart from the specific front lens, the housing of the OTOS® B5 is identical in construction to the IP65 hybrid moving head OTOS® H5, which ensures a harmonious appearance in the rig or even in the flight case when both fixtures are used together. In addition, the complete OTOS® series can be controlled via DMX, RDM and W-DMX™ (integrated transceiver). With a weight of only 33 kg, the OTOS® B5 Beam Moving Head is one of the lightest representatives of its performance class.

Specifications

Cold white

According to the colour temperature scale in Kelvin (K), “cold white” is a very bright, clear light in the colour temperature range between 5,000 and 10,000 K; it is slightly artificial in character and goes well with rich primary colours.

DMX512

Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).

Protection class IP65

The IP code of the protection class indicates how well the sensitive parts of the device are protected from foreign bodies and water entering. This device is fully protected from the penetration of dust and water jets.

Master & slave

Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.

Standalone mode

In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.

RDM

This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.

The W-DMX™ feature facilitates the wireless transmission of DMX control data.

This product is ETL certified.

Circular prism

A circular prism multiplies the beam or the gobo projection, placing the result inside a circle.

CMY

This spotlight uses a white light source and subtractive CMY colour blending (cyan, magenta, yellow) for an extremely large palette of colours.

Colour wheel

Turning the colour wheel, which is fitted with various filters, enables very fast changes of colour.

Discharge lamp

Discharge lamps are highly efficient and very bright. They provide a constant light output, good colour reproduction and a long service life.

Focus

The focus function serves to focus the light beam and the gobo projection at any distance.

(Gobo wheel)

Gobo wheels are fitted with static or rotating gobos made of metal or glass. Gobos are essentially templates that allow the projection of patterns, shapes and graphics.

The PAN & TILT feature moves light emission along the X and Y axes.