EVOS® W7 IP
Note: Current specifications are not final and may vary.
If you're looking for a particularly natural-looking LED light for effects and lighting outdoors, then this IP65-rated Wash Beam Moving Head is the right choice. The warm white LED allows you to blend attractive warm pastel shades, and also delivers a wonderful warm white light for lighting people/objects/etc. The Cameo EVOS® W7 IP Wash Beam Moving Head with Single Pixel Control is devices, the Cameo EVOS® W7 offers a particularly high colour reproduction index. The warm white chip can be used to light people or objects - either with naturally warm white light or as mood lighting in pastel shades. This versatility results from the unique combination of a full-colour LED with a WW chip, which generates extremely clearly defined white tones with a CRI above Ra 90.
Providing individual control of all LEDs by means of Single Pixel Control, the Cameo EVOS® W7 IP Wash Beam Moving Head produces breath-taking pixel effects. The powerful luminous flux floods any event with warm, bright light in clearly defined colours and delivers generous coverage up to 540° horizontally (pan) and 270° vertically (tilt). Its versatility is further enhanced by an impressive zoom range of 4.5° to 55°, which facilitates powerful beam and large-area wash effects.
Live broadcast images of your event are guaranteed to be flicker-free because the Wash Beam Moving Head's refresh rate can be adjusted in six stages between 800 Hz and a maximum of 25 kHz.
Software control via a network is highly flexible with DMX, RDM Art-Net3, sACN or KlingNet. Further effect devices in the network are looped through via 5-pin XLR sockets. Independent operation and mains-independent configuration in Auto Program and Static Mode are carried out via the 4 touch buttons with battery-powered graphic display. Preset colour filters allow problem-free use in combination with conventional headlamps.
DMX512
Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).
Environment-friendly
The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.
LED technology
LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
Master & slave
Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
RGB additive colour system plus white LEDs
Additional white LEDs create more contrast and clearer colour boundaries. What is more, they improve the creation of white and pastel colours.
Standalone mode
In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.
Strobe
Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.
Single pixel control
This device has an individual pixel control function. Since the colour and brightness of each LED pixel can be individually controlled (“Single Pixel Control”), the device can be used to generate animated graphic patterns and pixel mapping effects.
RDM
This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.
ARTNET compatible
The device is ArtNet compatible. ArtNet is a network protocol for transmitting DMX-512 or RDM data via an ethernet connection.
The PAN & TILT feature moves light emission along the X and Y axes.
The W-DMX™ feature facilitates the wireless transmission of DMX control data.
The device features wireless master/slave operation.
The high-frequency control of the LEDs while dimming ensures flicker-free operation, including for filming purposes.
sACN compatible
This spotlight is compatible with the sACN protocol (streaming ACN) for transporting DMX data via a network.
The calibration chip ensures that the mixed colours of the lamp are reproduced identically when using several fixtures, thereby preventing any deviations in colour between the lamps.
Protection class IP65
The IP code of the protection class indicates how well the sensitive parts of the device are protected from foreign bodies and water entering. This device is fully protected from the penetration of dust and water jets.
| Product type | LED Moving Lights |
| Type | Moving Head |
| Colour spectrum | RGBWW |
| Number of LEDs | 19 |
| LED type | 40 W RGBWW |
| Refresh rate | 800 Hz, 1200 Hz, 2000 Hz, 3600 Hz, 12 kHz, 25 kHz - adjustable Hz |
| Dispersion | Beam Angle: 4.5 ° - 34 °, Field Angle: 7 ° - 55 ° |
| DMX input | Network, XLR 5-pin male IP65 |
| DMX output | Network, XLR 5-pin female IP65 |
| DMX mode | 16-channel, 18-channel, 23-channel, 33-channel, 43-channel, 87-channel |
| DMX Functions | Colour presets, Device Settings, Dimmer, Dimmer Fine, Effect patterns, Motion Macro, Pan/Tilt, Pan/Tilt fine, Patterns, Single Pixel Control, strobe, Zoom, Zoom Fine |
| PAN movement | 540 ° |
| TILT movement | 270 ° |
| Standalone modes | Art-Net3, DMX512, KlingNet, RDM enabled, sACN |
| Controls | Encoder wheel |
| Indicators | Backlit colour LCD display, Battery supply for mains-independent system settings (automatically rechargeable battery) |
| Operating voltage | 100 V AC - 240 V AC, 50 - 60 Hz |
| Power consumption | 900 W |
| Fuse | T10AL 250 V |
| Power connector | Neutrik TrueOne Input |
| Housing material | Environment-friendly fire-retardant ABS, nylon and polycarbonat |
| Cabinet colour | Black |
| Protection class IP | IP65 |
| Luminous flux | 12500 lm |
| Weight | 25 kg |
For a quote on this item, please contact our sales department or make an appointment with our sales representatives.
Adam Hall North America Inc.
sales.us@adamhall.com
+1 973-335-7888