Contents and categories

Display all

Contents and categories

Series

Search suggestions

Display all results
  • NEW
  • NEW

OTOS® W12 IP65 Wash Moving Head

Item No.: CLOTOSW12
Series: OTOS® Series
Versions:
32 x 50W RGBL-LED with a total output of 3,100 / 9,900 / 19,500 lm luminous flux
Single pixel control
Controllable FX LED effect ring
Zoom lens and zoom range 4° - 60°
Multi-zoom enables three individually controllable zoom levels
Dual input mode as option for pixel mapping
Flexible control options via integrated W-DMX™ & CRMX transceiver, DMX and RDM
 

Contents and categories

Display all

Contents and categories

Series

Search suggestions

Display all results
32 x 50W RGBL-LED with a total output of 3,100 / 9,900 / 19,500 lm luminous flux
Single pixel control
Controllable FX LED effect ring
Zoom lens and zoom range 4° - 60°
Multi-zoom enables three individually controllable zoom levels
Dual input mode as option for pixel mapping
Flexible control options via integrated W-DMX™ & CRMX transceiver, DMX and RDM
Description

With vibrant accents, the wash products in the OTOS® series enrich outdoor concert and festival stages as well as major TV show productions. Three multi-faceted eye-catchers, rich in features that are an absolute must.

Versatile zoom levels

As the largest IP65 wash moving head in its series, the OTOS® W12 fascinates with its multi-zoom feature. It enables three different levels to be controlled individually and the zoom range to be adjusted on several levels. This feature can be used on two zoom levels with the OTOS® W6 and on one level with the OTOS® W3.

FX LED effect ring

All models have the controllable FX LED effect ring in common, which can shine both in white tones and in a wide range of colours. The effect ring is barely visible when the device is switched off as it has a narrow width and therefore fits discreetly into the stage design.

Single Pixel Control & Dual Input Mode

Depending on the size of the product, either 7 x 50W, 16 x 50W or 32 x 50W RGBL LEDs are available, which can be controlled individually using Single Pixel Control. - The FX effect LED ring also has a large number of pixels, which can also be controlled individually. For more efficient use of the DMX channels, you can also use the dual input mode, which allows you to assign a separate colour to each pixel via pixel mapping.

Flexible control options

All IP65 wash moving heads in the OTOS® series have an integrated W-DMX™ & CRMX transceiver, but can also be controlled by cable via DMX and RDM.

Three options that will spice up your shows. Decide now and "Ride vibrant".

Specifications
DMX512
Environment-friendly
Protection class IP65
LED technology
Master & slave
Standalone mode
Strobe
Single pixel control
RDM
RGBL
iDMX Stick compatible

DMX512

Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).

Environment-friendly

The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.

Protection class IP65

The IP code of the protection class indicates how well the sensitive parts of the device are protected from foreign bodies and water entering. This device is fully protected from the penetration of dust and water jets.

LED technology

LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.

Master & slave

Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.

Standalone mode

In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.

Strobe

Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.

Single pixel control

This device has an individual pixel control function. Since the colour and brightness of each LED pixel can be individually controlled (“Single Pixel Control”), the device can be used to generate animated graphic patterns and pixel mapping effects.

RDM

This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.

The PAN & TILT feature moves light emission along the X and Y axes.

The W-DMX™ feature facilitates the wireless transmission of DMX control data.

Various dispersion angles possible

The device features wireless master/slave operation.

This product is ETL certified.

The high-frequency control of the LEDs while dimming ensures flicker-free operation, including for filming purposes.

The calibration chip ensures that the mixed colours of the lamp are reproduced identically when using several fixtures, thereby preventing any deviations in colour between the lamps.

RGBL

This product contains an RGBL colour mix consisting of red, green, blue and lime.

iDMX Stick compatible

This product includes an input for the iDMX Stick, enabling an upgrade to W-DMX functions.

Photometric values
Illuminant type
LED, RGBL
Illuminant power
50 W
Beam/Field angle
Beam: 4 ° / Field: 60 °
Zoom range
4 - 60 °
LED PWM frequency
650 Hz, 1.530 Hz, 3.600 Hz, 12 kHz, 18,9 kHz, 25 kHz
Dimmer resolution
16 Bit
Dimmer curves
Exponential, Linear, Logarithmic, S-curve
Colours
Colour mix functions
RGB
LED colours
Blue, Green, Lime, Red
Correlated color temperature (CCT)
1,800 - 10,000 K
Calibration
Factory calibration, RAW
Min. colour rendering index (CRI)
85
Movement
Pan
630 °
Tilt
540 °
Effects
Strobe
0 - 20 Hz
Control
Controller protocols
DMX512, RDM, W‑DMX™ (Transceiver)
Data in connector
XLR 5-pole male
Data out connector
XLR 5-pole female
Mains operation
Operation voltage
100 V AC - 240 V AC/50 - 60 Hz
Rated power
1,400 W
Rated current
6 A
Mains connector
Mains plug device male IP65
Power out
Mains plug device female IP65
Housing
Chassis material
Die-cast aluminium
Colour
Black
Cooling system
Temperature controlled fan cooling
Environmental
Protection class
IP65
Temperature range
-10 - 40 °C
Dimensions & weight
Width
534 mm
Height
376 mm
Depth
583 mm
Weight
31 kg
Downloads & links
Name
Category
Type
File size
Tender documents Tender Specifications zip 131 KB
OTOS Brochure Catalog pdf 27 MB
CAMEO Product Catalogue Catalog pdf 9 MB
Product images Image files zip -
Tender documents

Category: Tender Specifications

Type: zip

File size: 131 KB

OTOS Brochure

Category: Catalog

Type: pdf

File size: 27 MB

CAMEO Product Catalogue

Category: Catalog

Type: pdf

File size: 9 MB

Product images

Category: Image files

Type: zip

File size: -

(0) Download files
Buy

For a quote on this item, please contact our sales department or make an appointment with our sales representatives.

Adam Hall North America Inc.
sales.us@adamhall.com
+1 973-335-7888