F4 FC High-Performance RGBW LED Fresnel Spotlight

A complete palette of dynamic colours and countless shades of white at maximum reproduction quality: The Cameo F4 FC is your perfect Fresnel spotlight for professional applications in front of the camera and in theatres. Its white tones can be precision-adjusted in CCT mode from 1,600 K to 6,500 K at a constant CRI of over 90, and perfectly adjusted to skin tones, camera sensors and ambient light via additional green-magenta correction. Using only three control circuits, colour-blending in HSI mode facilitates rapid adjustment of colour, intensity and saturation at the light desk. Using additional colour filters is a thing of the past. The high-quality 250 mm lens creates a soft-edged beam of light that can be manually and gradually adjusted to all intermediate positions from spot to flood in the 12° to 40° beam angle. At the same time, the integrated condenser lens provides evenly blended colours and shadow-free colour light dispersion, even when using the barndoor.

The F4 FC is fully RDM-capable and has a range of DMX control modes as well as multiple 16-bit dimmer curves with adjustable response. Even at its lowest setting, gradual dimming meets the highest theatre demands. The unique quicklight function make setup of the spotlight much easier. Simply remove the DMX signal for a moment, increase the lighting brightness via the push encoder and adjust the spotlight. Six selectable pulse width modulation frequencies of 800 Hz to 25 kHz ensure flicker-free operation, even for high-speed camera settings. A heatpipe combined with a temperature-controlled fan provides highly efficient cooling and virtually noiseless operation. For convenient configuration, the spotlight's robust die-cast aluminium housing is equipped with a push encoder and an OLED display. 5-pin DMX connections allow simple daisy-chaining. Included are an 8-way barndoor, a filter frame and a mains cable with a Schuko plug.