Contents and categories

Display all

Contents and categories

Series

Search suggestions

Display all results
  • NEW
  • NEW

F2 FC+ Spectrum-optimised Fresnel spotlight with RGBAL LED

Item No.: CLF2FCPLUS
Series: F-Series
Versions:
Full colour Fresnel with RGBAL LED
High CRI (>90) and TLCI (>93) for natural colour rendering
Seamless colour temperature adjustment from 1,600 K to 6,500 K
Adjustable green-magenta correction
Brilliant colours and precise white tone adjustment
Continuous zoom for beam angles from 18° to 55°
Four selectable 16-bit dimmer curves with adjustable response
Flicker-free and noiseless operation, ideal for TV, film, photography studios and theatre
Includes 8-way barndoor and gel filter frames
 

Contents and categories

Display all

Contents and categories

Series

Search suggestions

Display all results
Full colour Fresnel with RGBAL LED
High CRI (>90) and TLCI (>93) for natural colour rendering
Seamless colour temperature adjustment from 1,600 K to 6,500 K
Adjustable green-magenta correction
Brilliant colours and precise white tone adjustment
Continuous zoom for beam angles from 18° to 55°
Four selectable 16-bit dimmer curves with adjustable response
Flicker-free and noiseless operation, ideal for TV, film, photography studios and theatre
Includes 8-way barndoor and gel filter frames
Description

The complete palette of dynamic colours in maximum reproduction quality - the Cameo F2 FC+ is the perfect Fresnel spotlight for professional use in front of the camera and in the theatre. The plus version brings an spectrum-optimised RGBAL LED to the F2 Fresnel spotlight range and impresses with its brilliant colour mixing. Its white tones can be precisely adjusted in CCT mode from 1,600 K to 6,500 K at a constant CRI of over 90, and perfectly adjusted to camera sensors and ambient light via additional green-magenta correction. RGBAL colour-blending in HSI mode facilitates rapid adjustment of colour, intensity and saturation at the light desk using only three control circuits. Using additional colour filters is in the past. The high-quality 200 mm lens creates a soft-edged beam of light, which can be manually and gradually adjusted in the 18° to 55° beam angle from spot to flood and all intermediate positions. At the same time, the integrated condenser lens provides evenly blended colours and colour shadow-free light dispersion, even when using the barndoor.

The F2 FC+ is fully RDM-capable, and has a range of DMX control modes as well as four 16-bit dimmer curves with adjustable response. Even at its lowest setting, gradual dimming meets the highest theatre demands. Six selectable pulse width modulation frequencies of 800 Hz to 25 kHz ensure flicker-free operation, even for high-speed camera settings. A heatpipe combined with a temperature-controlled fan provides highly-efficient cooling and virtually noiseless operation. For convenient configuration, the spotlight's robust die-cast aluminium housing is equipped with three rotary encoders and an OLED display. 5-pin DMX connections and TRUE1 TOP compatible sockets facilitate unproblematic daisy chaining. Included are an 8-way barndoor, a filter frame and a mains cable.

Specifications
DMX512
Environment-friendly
LED technology
Master & slave
Standalone mode
Strobe
RDM
UNICON compatible
RGB AL

DMX512

Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).

Environment-friendly

The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.

LED technology

LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.

Master & slave

Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.

Standalone mode

In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.

Strobe

Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.

RDM

This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.

This product is ETL certified.

The high-frequency control of the LEDs while dimming ensures flicker-free operation, including for filming purposes.

UNICON compatible

This product is compatible with the Cameo UNICON® and thus enables configuration and control of DMX devices

RGB AL

Due to its RGBAL colour blending, this spotlight is able to reproduce virtually any colour and colour temperature of white.

Photometric values
Illuminant type
RGBAL LED
Exchangable lens
No
Exchangable optics
No
Beam/Field angle
15° / 90°
Zoom range
15 - 90 °
Dimmer resolution
16 Bit
Colours
LED colours
Red, Green, Blue, White, Amber, Lime
Halogen simulation redshift/DTW
No
Effects
Iris
No
Animation
No
Framing blades
No
Control
Controller protocols
DMX512, RDM
Number of DMX control modes
11
Stand alone operating modes
Static
Data in connector
XLR 5-pole male
Mains operation
Rated power
250 W
Min. Cos Phi power factor (230 V)
0.95
Mains connector
Mains plug device male IP65
Power out
Mains plug device female IP65
Housing
Chassis material
Die-cast aluminium
Colour
Black
Cooling
Cooling system
Heat pipes, Temperature controlled fan cooling
Environmental
Protection class
IP20
Dimensions & weight
Width
302 mm
Height
433 mm
Depth
442 mm
Weight
9 kg
Downloads & links
Name
Category
Type
File size
User´s Manual (04-2024) Manual pdf 12 MB
DMX Control Table (04-2024) Data Sheet pdf 85 KB
Data sheet Data Sheet pdf 661 KB
Technical Drawing Data Sheet dxf 19 MB
Technical Drawing Data Sheet pdf 390 KB
Technical Drawing 3D Data Sheet zip 34 MB
Photometric measurements Data Sheet pdf 2 MB
Fixture Library GrandMA2 (12-2023) Software zip 23 KB
GDTF File (03-2024) Software zip 774 KB
Tender documents Tender Specifications zip 131 KB
Cameo Product Catalogue 2024 Catalog pdf 12 MB
Product images Image files zip -
User´s Manual (04-2024)

Category: Manual

Type: pdf

File size: 12 MB

DMX Control Table (04-2024)

Category: Data Sheet

Type: pdf

File size: 85 KB

Data sheet

Category: Data Sheet

Type: pdf

File size: 661 KB

Technical Drawing

Category: Data Sheet

Type: dxf

File size: 19 MB

Technical Drawing

Category: Data Sheet

Type: pdf

File size: 390 KB

Technical Drawing 3D

Category: Data Sheet

Type: zip

File size: 34 MB

Photometric measurements

Category: Data Sheet

Type: pdf

File size: 2 MB

Fixture Library GrandMA2 (12-2023)

Category: Software

Type: zip

File size: 23 KB

GDTF File (03-2024)

Category: Software

Type: zip

File size: 774 KB

Tender documents

Category: Tender Specifications

Type: zip

File size: 131 KB

Cameo Product Catalogue 2024

Category: Catalog

Type: pdf

File size: 12 MB

Product images

Category: Image files

Type: zip

File size: -

Related Products
Buy

For a quote on this item, please contact our sales department or make an appointment with our sales representatives.

Adam Hall North America Inc.
sales.us@adamhall.com
+1 973-335-7888