X3 TW Exhibition Lamp with Tunable White LEDs
Whether at trade fairs, in galleries or museums - when the focus is on the presentation of products, works or exhibits, a flexible spotlight is needed for precise illumination. With the Cameo X3 TW, stand builders, lighting designers and technicians get a powerful LED specialist for pinpoint illumination of objects and exhibition areas in different white light colours.
With its 31 x 15W LEDs, the X3 TW produces an extremely high light output of 21,000 lumens. This means that the trade fair spotlight can easily assert itself even in brightly lit halls. Equipped with a narrow beam angle of 8°, the X3 TW can be aimed precisely at objects. Thanks to the seamlessly adjustable colour temperature in the range from 3,200 K to 6,800 K, users can create warm white, neutral white or cool white light colours - depending on the requirements profile.
Additional flexibility and precision are provided by the optionally available barndoor. For wider areas, Cameo offers optional filters for beams with 20°, 50°, 80°, 10° x 60° beam angles. In addition, the compact and 7.5 kg light X3 TW does not cause space or weight problems in the always overcrowded rigs of exhibition halls & Co. Thanks to the adjustable PWM frequency (650 Hz - 25 kHz), the X3 TW also enables flicker-free operation.
The Cameo X3 TW can be controlled via DMX512 or RDM. On the fixture itself, rotary-push encoders and an LED display provide a convenient basic setup.
DMX512
Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).
Environment-friendly
The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.
LED technology
LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
Master & slave
Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
Standalone mode
In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.
Strobe
Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.
RDM
This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.
The high-frequency control of the LEDs while dimming ensures flicker-free operation, including for filming purposes.
For a quote on this item, please contact our sales department or make an appointment with our sales representatives.
Adam Hall North America Inc.
sales.us@adamhall.com
+1 973-335-7888